Six Organization Mistakes To Avoid When Handling Cabling At Your Data Center

Posted on: 26 April 2017

Proper cabling is of vital importance in a data center to make sure that computers and other hardware equipment connect efficiently and effectively with servers. 

There are a lot of important considerations that go into properly designing the cabling in a data center. If you're looking for ways to correct disorganized cabling at your data center, redesign to avoid the following five mistakes:

Neglecting to label cables

Labeling cables makes working with cabling much easier. If you're dealing with particularly long cables, you should probably even put multiples labels on them. 

Without labels, it can become impossible to keep track of the default locations of your cables. It doesn't take a long time to slap a few labels on when you set up cabling, but it can go a long way with saving time in the future. 

Not taking advantage of the convenience of color coding

In addition to labeling, you should also consider color coding to identify your cables and to increase the efficiency of working on your computer system. Purchase cables in different colors to facilitate color coding and to make it easier to troubleshoot problems in your system. 

Letting cables overheat

Unfortunately, a lot of computer system designers overlook the importance of keeping cables cool and focus all their efforts on keeping servers cool. However, keeping cables cool is also very important.  

You can maximize the efficiency of energy consumption in your computer system by preventing overheating of cables. Make sure that areas where cables pass through are adequately ventilated and that the air is conditioned to prevent overheating. 

Using conduits that won't keep up with growth in the near future

Ideally, laying out your cabling should be a one-time job that will last for years to come. However, growth in your company can make it so that you need larger conduits.

Plan conduit installation so that your cabling can adjust and keep up with growth at your company and in your computer system.

Using patch cables that are much longer than necessary

Long patch cables between hardware pieces that are close together can create a disorganized look and make it hard to pinpoint the right cable when you're troubleshooting a technical issue.

Whenever possible, try to use cables that are just long enough to get the job done and don't leave a great deal of slack.

Not adequately testing cables when they're set up

Before you finish the job of cable installation, you need to test your cables to make sure that they work properly in their current configuration. Otherwise, you may find that you need to put more time into repairing cabling issues immediately after you've finished your cabling setup. 

For more tips and information about network cabling infrastructure, talk to companies like Office Telesystems, LLC.

Share